52 lines
1.2 KiB
YAML
52 lines
1.2 KiB
YAML
|
mqtt:
|
||
|
|
enabled: false # set to true and fill in host below if you use Home Assistant / MQTT
|
||
|
|
# host: 192.168.1.10
|
||
|
|
# port: 1883
|
||
|
|
# user: mqtt_user
|
||
|
|
# password: mqtt_password
|
||
|
|
|
||
|
|
detectors:
|
||
|
|
coral:
|
||
|
|
type: edgetpu
|
||
|
|
device: usb # single USB Coral. Uses the bundled Mobiledet model by default.
|
||
|
|
|
||
|
|
cameras:
|
||
|
|
camera_1:
|
||
|
|
ffmpeg:
|
||
|
|
inputs:
|
||
|
|
# Full-resolution main stream -> used for recording
|
||
|
|
- path: rtsp://user:password@192.168.1.50:554/stream1
|
||
|
|
roles:
|
||
|
|
- record
|
||
|
|
# Lower-resolution substream -> used for detection (saves CPU on the Pi 5)
|
||
|
|
# If your camera has no substream, delete this block and add "detect"
|
||
|
|
# to the roles list above instead.
|
||
|
|
- path: rtsp://user:password@192.168.1.50:554/stream2
|
||
|
|
roles:
|
||
|
|
- detect
|
||
|
|
detect:
|
||
|
|
width: 1280 # must match your detect (sub)stream resolution
|
||
|
|
height: 720
|
||
|
|
fps: 5
|
||
|
|
|
||
|
|
record:
|
||
|
|
enabled: true
|
||
|
|
retain:
|
||
|
|
days: 7
|
||
|
|
mode: motion
|
||
|
|
|
||
|
|
snapshots:
|
||
|
|
enabled: true
|
||
|
|
retain:
|
||
|
|
default: 14
|
||
|
|
|
||
|
|
# Objects to track. Defaults to person if omitted.
|
||
|
|
objects:
|
||
|
|
track:
|
||
|
|
- person
|
||
|
|
- car
|
||
|
|
- cat
|
||
|
|
- dog
|
||
|
|
|
||
|
|
version: 0.16-0
|